Accessories / Order Designation
24
BCL 8
Leuze electronic
Attention!
If you use a sensor with a standard M12 connector, then please note the following:
Use
only sensors
on which the
switching output does not lie on pin 2
or
sensor cables
on which pin 2 is not assigned
. Otherwise, the switching output is not protected against
feedback on the switching input. If the inverted sensor output lies on pin 2, erroneous
behaviour of the switching output will result.
Connecting the switching input / switching output
The MA 8.1 is provided with a switching input and a switching output. The connection of
switching input / switching output is carried out according to figure 5.2.
Figure 5.2:
Connection of the switching input/output of the MA 8.1
Switching input
Switching output
