Safety Notices
Leuze electronic
Technical description BCL 21/22 SB
7
TNT
35/7-2
4
V
2.3
Working Safely
Attention!
Access to or changes on the device, except where expressly described in this operating
manual, is not authorized.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability
insurance association.
Qualified personnel
Mounting, commissioning and maintenance of the device must only be carried out by
qualified personnel.
Electrical work must be carried out by a certified electrician.
Attention Laser Radiation!
WARNING: The bar code reader BCL 21/22 SB operates with a blue light laser of class 2
acc. to EN 60825-1. If you look into the beam path over a longer time period, the retina
of your eye may be damaged!
Never look directly into the beam path!
Do not point the laser beam of the BCL 21/22 SB at persons!
When mounting and aligning the BCL 21/22 SB, take care to avoid reflections of the
laser beam off reflective surfaces!
Heed the laser safety regulations according to DIN EN 60825-1 in their most current
version! The output power of the laser beam at the reading window is at most 1.8mW
acc. to (DIN) EN 60825-1.
The BCL 21/22 SB uses a laser diode with low power in the visible blue light range with
an emitted wavelength of 405nm.
CAUTION - the use of operating and adjusting devices other than those specified here
or carrying out of differing procedures may lead to dangerous exposure to radiation!
