Important Parameters
Leuze electronic
Technical description BCL 21/22 SB
53
TNT
35/7-2
4
V
10
Important Parameters
10.1
Code menu
Figure 10.1: Standard setting of the Code menu
Notice!
If the code EAN128 is to be read, 3 additional characters are to be set for the code identifier.
Code table
Here, the codes which are to be decoded are set. We recommend enabling only the code
types which are to actually be read with the corresponding element numbers.
Important: Code 1 must always be selected. If multiple code types are to be used, set in
sequential order: Code 1, Code 2, …
Number Of Digits
In the field Element number, up to 3 element entries may be entered.
An area is represented by a dashed line: e.g. 4-40 digits.
With 2 or 3 different element entries
by a comma: e.g: 8,13 digits
The combination is also possible,
but the range must be specified first: e.g.: 4-10,20 digits
Properties
Behind the "Properties" button, to the right of the respective code, the code-specific
settings, such as the check digit, can be selected.
Number of bar
codes
Here, the number of the bar codes to be decoded within a read cycle (one reading gate) is
set.
