DR-6255
HF CSN Desktop Reader
User Manual
1. Introduction
The DR
‐
6255 is an HF CSN Desktop Reader. It reads the HF Card
Identification Number and transmits it to connected access control
software, such as Rosslare’s AxTraxNG™.
It has a slim and attractive design and is built for convenience and
portability. With its USB computer interface, it is quick and easy to
install and runs without any additional power source. Designed to sit
safely on any desktop, the DR-6255 is sturdily built, with surface-
gripping rubber feet.
1.1
Features
Reads HF Serial number (CSN)
ISO14443A, ISO14443B, ISO15695, ISO18092 NFC Tag Card,
TOPAZ, FeliCal
Bi-Colored LED
Supports USB 2.0 Standard (compatible with USB 1.1), meets the
EIA Standard
Driver supports the following Operating Systems:
Windows 7 32- and 64-Bit, Windows XP 32- and XP 64-Bit,
Windows 8 32- and 64-Bit
Figure 1: DR-6255
2. Technical Specifications
2.1
Electrical Characteristics
Operating Voltage Range
5 VDC (USB powered)
Standby Current
90 mA
Max. Operation Current
130 mA
Supported Transponders
•
ISO 14443A/B
•
ISO 15693
•
ISO 18092
•
FeliCa
Read Card Distance
Up to 5 cm (10 in.)
RF Modulation
ASK
Operation Frequency
13.56 MHz
Bit Rate
106 kHz
Output Formats
Wiegand 26-Bit (default)
Note: Wiegand 32-Bit, 34-Bit, and 40-
Bit also supported, but must be
pre-programmed by the factory
upon request
.
2.2
6B
Environmental Characteristics
Operating Environment
Indoor use
Operating Temperature Range
0°C to 63°C (32°F to 145°F)
Storage Temperature Range
-20°C to 63°C (-4°F to 145°F)
Relative Humidity Range
0 to 95% (non-condensing)
2.3
7B
Physical Characteristics
Weight
130 g (4.6 oz)
Dimensions (L x W x H)
123 x 70 x 16.2 mm (4.9 x 2.8 x 0.6 in.)
3.
2B
Installing the USB Driver
To download the driver, please refer to
http://www.rosslaresecurity.com
To install the driver for all cables:
1. Go to
http://www.rosslaresecurity.com
2. Click
Downloads in the Quick Links section.
3. In
Document Types, select Driver and click
Search
.
4. Click the Download icon.
5. Double-click the installation file: CDM20824_Setup.
After a few moments, a completion message appears and the
window closes.
4.
3B
Enrolling Cards using AxTraxNG
You must use the AxTraxNG software to enroll cards.
Please refer to Appendix J in the
AxTraxNG™ Software Installation and
User Manual.
