Page 3 of 19
STEP 3
Rub all four sides of the TwinTube
[A]
Spine with Wax Block
[K]
. [Fg. 6 & 8]
K
[Fg. 6]
A
STEP 4
Insert the female Slide Tubes
[M]
all the way onto the fixed
tubes of the TwinTube
[A]
Spine. [Fg. 7]
Be sure that the mounting holes on the TwinTube
[A]
and
Slide Tubes
[M]
align and that the small hole at the end of
the tub is facing down.
A
M
Mounting Hole
Mounting Hole
[Fg. 7]
STEP 5
REQUIRED TOOL: 1/2” WRENCH
M
P
T
U
Q
N
Set the one (1) Wing Track
[N]
on top of the Slide Tubes
[M]
.
Place two (2) Hat Brackets
[P]
underneath the Slide Tubes
[M]
so the Hat Brackets wrap around the Slide Tubes and
align with the holes located along the Wing
[N]
as shown.
Using two (2) 5/16in Carriage Bolts
[Q]
, two (2) 5/16in
Carriage Washers
[T]
, and two (2) 5/16in Nylock Nuts
[U]
per Hat Bracket
[P],
connect the Hat Brackets to the Wing
[N]
. [Fg. 8]
[Fg. 8]
Hand tighten only at this time, further adjustment will
be required before final assembly.
