Summit Series II ®
2 of 28
User’s Manual
CHARGER RATINGS LABEL
The ratings label is located on the front of the charger and provides the model (MODEL), serial number (located
below the barcode at the bottom of t he label), AC input ratings (INP UT), and DC output ratings (OUTPUT) of the
charger. The BA TTE RY field indicates the factory -configured active battery profile type. The BA TTERY field
amp-hour (A h) rating indicates the full range of battery capacities that are recommended for use with this charger.
A different active battery profile may be required t o optimize the charging of specific battery capacities within this
range. Before (1) using the charger for the first time or (2) using the charger with a battery pack of a different type
or capacity, use the ChargerCo nnect
™
app to verify that the proper active battery profile is selected (see Section
8).
One of two styles of ratings label will be attached to your charger. Examples of both styles are shown below.
Please fill in the applicable blank label below with the information from the ratings label on your charger for future
reference.
CAUTION: PRIOR TO OPERATING THE CHARGER, VERIFY THE BATTERY PROFILE MATCHES THE
BATTERI ES IN YOUR EQUIPMENT AND THE SYSTEM SETTINGS MATCH YOUR APPLI CATION BY USING
A WIRELESS DEVICE AND THE CHARGER APP AS DES CRI BED IN S ECTI ON 10.4.
Document any configuration or settings changes that are made by marking the ratings label on your charger or on
an additional label or tag attached to your charger.
SAVE THIS MANUAL: Keep it in a location where it is available to anyone who may
operate the charger.
