Summit Series II ®
23 of 28
User’s Manual
12. LED INDICATORS
The charger has four (4) LEDs to indicate c harger status and fault information. The functionality of the LE Ds
is outlined below and explained in the table below.
12.1 Charger LED Status
The functionality of the LE Ds is outlined below and in the following table.
AC P RES ENT (Blue) -
Indicates charger is connected to a live AC inlet.
FAULT (Red) -
Indicat es when a charger or battery fault has occurred (s ee section 12.2 for more
information).
CHARGE STATUS (Yellow) -
Indicates charge cycle status.
CHARGE COMPLETE (Green) -
Indicates when a charge cycle completes successfully, when an
extended Balance/Equalize charge cycle phase is active, or when a post -charge phase is active.
FAULT
(Red) LED
CHARGE
STATUS
(Yellow) LED
CHARGE
COMPLETE
(Green) LED
DESCRIPTION
Solid On
Solid On
Solid On
LED check for a few seconds during charger
initialization
Slow Blink
Off
Bulk/Start charge cycle phase (constant power
or constant current).
Fast Blink
Off
Absorption/Plateau charge cycle phase
(constant voltage). Greater than 80% charged.
Solid On
Off
Finish charge cycle phase (constant current).
Not all charge profiles include a Finish phase.
Off
Fast Blink
Balance/Equalize phase. An extended charge
cycle is occurring because a trigger condition
has been met (cycle count, etc). Not all charge
profiles include a Balance/Equalize phase.
Off
Solid On
Charge cycle complete.
Off
Slow Blink
Charge cycle complete. Post Charge phase
(constant voltage float, etc). Not all charge
profiles include a Post Charge phase.
Slow Blink
Slow Blink
Slow Blink
Charger Bluetooth connected to a smart phone
or device, LEDs blink at the same time
