Leroy-Somer FMV 2107, Руководство по установке и обслуживанию

Страница: 30 / 60

4.1.3.5 - Access to parameters when a security
code has been programmed
1) Switch the inverter on : " rdY " is displayed.
2) Press the key : the display will indicate P0 and its
value alternately.
3) Press the or key until Pb is reached. The display
will indicate Pb and 0 alternately.
4) Press the key : the display will indicate 0.
5) Press the key to enter the security code.
6) Press the key, the display indicates Pb and its
value alternately.
7) Press the or key to select the parameters to be
modified.
Note : The value of Pb will be masked when the inverter
is switched off.
4.1.3.6 - Modification of a security code
1) Switch the inverter on : " rdY " is displayed.
2) Press the key : the display indicates P0 and its
value alternately.
3) Press the or key until Pb is reached. The dis-
play indicates Pb and 0 alternately.
4) Press the key : the display indicates 0.
5) Press the key to enter the security code.
6) Press the key twice, the display indicates Pb
and its value alternately.
7) Press the or key to enter the new code.
8) Switch off the inverter.
Note : The code can be deleted if 0 is entered as the
new code.
4.1.3.7 - Modification of b14 (8.8 - 480)
1) Switch the inverter on : " rdY " is displayed.
2) Press the key : the display indicates P0 (the
parameter) and 0 (its value) alternately.
3) Press the or key until b14 is reached : the dis-
play indicates b14 and 2.9 alternately.
4) Press the key : the display indicates 2.9.
5) Press the key until 8.8 appears.
6) Press the key, the display indicates 120.
7) Press the key until 480 appears.
Note : Check that parameters P0, P1, P7, PC, P10 to
P12 and P20 to P26 have not been modified.
4.1.3.8 - Read fault log
1) Switch the inverter on : " rdY " is displayed.
2) Press the key : the display indicates P0 and its
value alternately.
3) Press the or key until PA is reached : the
display indicates PA and 0XX alternately.
4) Press the key : the display indicates 0XX, 0
indicating the last fault and XX indicating the fault in its
mnemonic form (see section 5).
5) Press the key : the display indicates : 1XX (i.e.
the second to last fault).
6) Press the key to scroll down to the oldest fault.
Note : Each time the inverter is switched off, " UU "
becomes the last fault stored and the chronological order
is revised, the oldest fault being wiped from the memory.
30
Frequency inverters
FMV 2107
FMV 2307
M
M
M
M
M
M
M
M
M
M
M