Leroy-Somer CPLS 112, Руководство по установке и обслуживанию

Страница: 25 / 28

25
INSTALLATION AND MAINTENANCE
CPLS drip-proof 3-phase induction motors
4240 en - 2014.09 / b
LEROY-SOMER
6.4 - Tightening pins/tie rods
These must be tightened diagonally, to the torque indicated
(see below).
Φ T
min
(Nm) T
max
(Nm)
CPLS 112 M6 5 6
CPLS 132 M8 15 20
CPLS 160 M10 30 35
CPLS 200 M12 55 60
CPLS 250 M16 140 146
6.5 - Before recommissioning
- If necessary, grease the new bearings.
It is advisable to test
the motor at no load.
- If necessary, repaint the motor.
- Mount the transmission device on the motor shaft extension
and reinstall the motor on the machine to be driven.
7 - SPARE PARTS
When ordering spare parts, you must indicate the complete
motor type, its serial number and the information given on the
nameplate (see section 1).
Part numbers should be identified from the exploded views
and their description from the parts list.
Our extensive network of service centres can dispatch the
necessary parts without delay.
To ensure that our motors operate correctly and safely, we
recommend the use of original manufacturer spare parts.
In the event of failure to comply with this advice, the
manufacturer cannot be held responsible for any damage.