leptron Precision RDASS, Руководство пользователя

Страница: 22 / 36

19
Launch”. The FTO will press confirm on the engine enable page
to advance to the launch page and then press “Launch Now”
button and announce “Launching Aircraft”.
The RCO will carefully observe the aircraft’s vertical climb to the
minimum altitude. If the aircraft drifts excessively on takeoff or
fails to maintain heading, the RCO shall without delay engage
Manual Mode and land the aircraft as soon as possible.
If the aircraft is launched in Steering mode, the RCO shall wait
until the aircraft has established a stable hover above the
lanuch point before sending flight commands. If the aircraft is
launched in autopilot mode, the aircraft can be sent on a flight
plan or flown using the virtual joysticks.
Note: it is recommended to set the minimum altitude a
minimum of 8 meters above the field elevation of the takeoff
point.
Training and Evaluation Requirements:
1. Training. Training may be conducted using the aircraft or a
simulation.
2. Evaluation. Evaluation will be conducted using the aircraft.