leptron Precision RDASS, Руководство пользователя

Страница: 24 / 36

21
3.5 Vertical Descent and Landing from a Hover
Condition(s):
1. Precision RDASS in Stable 5m Hover
2. Aircraft in a stable hover located over the intended landing
area
Standard(s):
1. Smooth, continuous descent from a hover to the ground.
2. Maintain Heading ± 10 degrees.
Crew Actions:
Flight Tablet Operator (FTO):
1. Announce to the Remote Control Operator “Landing
Now” prior to pressing the “Land Now” button”.
Procedure:
Landing may be accomplished using either the flight tablet or
the remote control.
The FTO accomplishes a vertical descent and landing by
positioning the landing waypoint on the map at the intended
landing area and pressing “Land Now”. The flight crew shall
verify that the aircraft has a clear flight path from its current
position to the landing point. The aircraft will turn toward and
fly to the landing point. When the aircraft is above the landing
point it will accomplish an automated descent and landing.
When the aircraft is on the ground the rotors will shutoff
automatically. If the rotors continue to turn after landing, Press
“Kill” under the Engine Menu in PccLite.
In order to land and using the remote control, the RCO will
place the mode switch in steering. The aircraft will not be able
to descend below the minimum altitude until the FTO presses
“Land Now”. The RCO shall position the aircraft directly over the
intended point of landing prior to the FTO pressing “Land Now”.
The RCO will apply and maintain downward throttle until the
aircraft is on the ground and the rotors have stopped.