Lenze PositionServo 940, Руководство пользователя

Страница: 9 / 68

S94P01B
7
2 Specifications
2.1 Electrical Characteristics
Single-Phase Models
Type Mains Voltage (1)
1~ Mains
Current
(doubler)
1~ Mains
Current
(Std.)
Rated Output
Current (4)
Peak Output
Current (5)
E94P020S1N
120V
(2)
or 240V
(3)
9.7 5.0 2.0 6
E94P040S1N 16.8 8.6 4.0 12
E94P020S2F
120 / 240V
(3)
(80 V -0%...264 V +0%)
-- 5.0 2.0 6
E94P040S2F -- 8.6 4.0 12
E94P080S2F -- 15.0 8.0 24
E94P100S2F -- 18.8 10.0 30
Single/Three-Phase Models
Type Mains Voltage (1)
1~ Mains
Current
3~ Mains
Current
Rated Output
Current (4)
Peak Output
Current (5)
E94P020Y2N
120 / 240V
(3)
1~ or 3~
(80 V -0%...264 V +0%)
5.0 3.0 2.0 6
E94P040Y2N 8.6 5.0 4.0 12
E94P080Y2N 15.0 8.7 8.0 24
E94P100Y2N 18.8 10.9 10.0 30
E94P120Y2N 24.0 13.9 12.0 36
E94P020T4N
400 / 480V
3~
(320 V -0%...528 V +0%)
-- 2.7 2.0 6
E94P040T4N -- 5.5 4.0 12
E94P050T4N -- 6.9 5.0 15
E94P060T4N -- 7.9 6.0 18
(1)
Mains voltage for operation on 50/60 Hz AC supplies (48 Hz -0% … 62Hz +0%).
(2)
Connection of 120VAC (45 V … 132 V) to input power terminals L1 and N on these models doubles the
voltage on motor output terminals U-V-W for use with 230VAC motors.
(3)
Connection of 240VAC or 120VAC to input power terminals L1 and L2 on these models delivers an equal voltage
as maximum to motor output terminals U-V-W allowing operation with either 120VAC or 230VAC motors.
(4)
Drive rated at 8kHz Carrier Frequency. Derate Continuous current by 17% at 16kHz.
(5)
Peak RMS current allowed for up to 2 seconds. Peak current rated at 8kHz. Derate by 17% at 16kHz.
Applies to all models:
Acceleration Time Range (Zero to Max Speed) 0.1 … 5x10 6 RPM/sec
Deceleration Time Range (Max Speed to Zero) 0.1 … 5x10
6
RPM/sec
Speed Regulation (typical) ± 1 RPM
Input Impedance (AIN+ to COM and AIN+ to AIN-) 47k
Ω
Power Device Carrier Frequency (sinusoidal commutation) 8,16 kHz
Encoder power supply (max) +5 VDC @ 300 mA
Maximum encoder feedback frequency 2.1 MHz (per channel)