Lenze L-force Communication ModemCAN EMF2181IB, Руководство по связи, Страница: 37 / 83

Commissioning
Configuring the communication module
6
l
37
EDSMF2181IB EN 3.0
After completing the configuration
If the configuration of a communication module has been successfully completed, the
Lenze tools can use it for communication.
Only the selection of the bus system used is carried out in the Lenze tools, all system
bus−specific settings and the selection of the communication module are carried out
exclusively via the system bus configurator.
)
Note!
While some of the older program versions of the Lenze tools still offer setting
options for interrupt and I/O address, they are meaningless in the context of
the communication module.
Callback function
)
Note!
ƒ
After a callback connection has been configured for the first time, the PC
must usually be restarted.
ƒ
The use of the callback function requires at least version 2.1 of the CAN
communication software.
When the callback function is used, the connection will only be established after the
following activities have taken place:
1. The PC calls the communication module.
2. The communication module returns the PC’s call under the phone number specified
in code C1205.