Product description
Connections and interfaces
16
Lenze · Decentralised frequency inverter 8400 motec (AS-Interface option) · EDS84DMOTASI EN 5.0 - 02/2019
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• By default, the AS-i terminal and the LEDs for the AS-i status displays are already mounted and
wired:
• AS-i connection to terminal strip X3
• LEDs on plug connector X55
• The positions A1 ... A4 and B1 ... B4 serve to freely connect the AS-i terminals, the LEDs for the
AS-i status displays and other connections (e.g. digital inputs).
• For the connections, 5-pin M12 connectors or - alternatively - cable glands (cable cross-section
max. 1.0 mm
2
, AWG 18) can be used.
• The M12 connectors, cable glands and prefabricated system cables can be obtained from
various manufacturers.
• Wire the M12 plugs or cable glands used with the corresponding contacts of the terminal strips
X3, X4 and X61.
"Inverter Drives 8400 motec" hardware manual
Observe the notes and wiring instructions contained in this documentation.
