Lenze 9400 Series, Руководство по связи

Страница: 82 / 145

11 Monitoring
11.1 Interruption of EtherCAT communication
82
Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 10.2 EN · 11/2018 · TD06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11 Monitoring
11.1 Interruption of EtherCAT communication
An interruption of the EtherCAT communication in the "Operational" state, e.g. due to cable break
of failure of the EtherCAT master, is detected by the slave.
The response to an interrupted communication is triggered by settings in the
Monitoring tab:
• During initialisation of the EtherCAT communication, the PDO watchdog monitoring time
preset in the master ( C13882 / C14882 ) is transmitted to the slave.
If the slave does not receive any valid process data in the "Operational" state, the setting in
C13885 / C14885 is taken as a basis for the process data.
• Value ’0’: The data sent last by the master are used.
• Value ’1’: PDOs are set to the value '0'.
After the watchdog monitoring time has elapsed, the slave changes to the "Safe-Operational"
state (see C13861 / C14861 ) and the green RUN LED is activated (see EtherCAT status displays
(

87)
).
There is no response in the slave.
• In order that a response is triggered in the slave, you have to set a Reaction on
communication failure ( C13880 / C14880 ).
• The response is delayed if you set an internal monitoring time ( C13881 / C14881 ) in
addition.
The monitoring time elapses as soon as the "Operational" state is exited. (See 1.).
After the monitoring time has elapsed, the set response is executed with the error message
" EtherCAT: Quit 'Operational' state [0x00c88131] "
(

95)
.