Lenz DIGITAL PLUS SET-02 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 62

background image

44

Information SET-02

model railway. The LZ100 takes over the generation of the track
format (the digital voltage on the track), the LH200 is no longer
connected directly to the LV200, but is connected to the LZ100 just
like any other X-Bus device.

During this process some of the menus and some features of LH200
are altered. You will also need a different cable for your LH200 you
used as the SET-02's command station. Please order this together
with a separate operating manual from your DCC supplier or directly
from Lenz Elektronik GmbH.

The features of your DCC system are now determined by the
software version of LZ100. Version 3 will have the following features:

-

9999 digital locomotives

-

1 non decoder equipped conventional locomotive

-

operation with 14, 28 and 128 throttle positions

-

up to 9 functions switchable in locomotives

-

storage of data for 200 locomotives

-

multiple traction/ multi unit:

-

storage of setting of up to 256 turnouts

-

faster, integrated feedback bus for the acquisition of messages
such as track occupation and switching of points

-

up to 30 input devices connectable to the X-Bus

-

separate connection of a programming track for the entering and
reading out of decoder features

15 Technical Appendix

In this section you will find:

-

information on the stack

-

valuable information on the Set-02's, LV200 power station

-

information on the wiring of your model railway

-

information on wiring the X-Bus network

-

further help on terminology and procedures

15.1 The LH200 stack

The

stack

provides for fast selection of up to six locomotives.

The stack can be compared to a small index-card box: this box
contains 6 index cards. Each one of these index-cards has a digit
address stored upon it, as well as information on speed and
direction and the status of functions. This means that as well as the
locomotive addresses, information allocated to the addresses such
as throttle position, direction of motion and functions is also stored.
We call this information "locomotive data".

«
...
42
43
44
45
46
...
»

Содержание DIGITAL PLUS SET-02































































Отзывы:

Нет отзывов

Похожие инструкции для DIGITAL PLUS SET-02

Бренд: ABB Страницы: 138

Бренд: ABB Страницы: 116

Relion 615 series

Бренд: ABB Страницы: 136

Бренд: GE Страницы: 2

Бренд: XOXO Modular Страницы: 13

Бренд: Balboa Water Group Страницы: 28

Бренд: Gantner Страницы: 56

Бренд: Unitech Страницы: 11

Бренд: B meters Страницы: 10

Бренд: B&R Industries Страницы: 89

Бренд: Häfele Страницы: 2

Бренд: Häfele Страницы: 24

ecomat 100 R 360

Бренд: IFM Electronic Страницы: 16

Ecomot300 AC2630

Бренд: IFM Electronic Страницы: 11

Бренд: IFM Electronic Страницы: 23

GECO LUX GECO60

Бренд: GiBiDi Страницы: 48

Бренд: Desoutter Страницы: 74

Бренд: jablotron Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды