Lenz DIGITAL PLUS SET-02, Руководство пользователя

Страница: 31 / 62

Information SET-02 31
DIGITAL plus
Set the direction switch so that the
locomotive will operate in the proper direction
when added to the consist. In this example
#4 will operate in the reverse direction as the
consist.
+
0
M
Enter the LH200 menu.
0
M
3x
Scroll through the menu until
the MU is shown and confirm
the selection with the "A "
key.
A
This time MU address 55 is shown in the
display since this is the last consist you
were working with. You could change
the address as above but in this example
we want to add the locomotive to this
consist address so confirm the selection
with the "A " key
A
The locomotive with address 4 has now
been added to the multi unit consist with
MU address 55.
Now whenever you move the rotary control-knob when address 55 is
in the display both locomotives #3 and #4 will move together.
You can repeat the steps above to add up to 24 locomotives to the
consist. Locomotives can be added or removed at any time you
desire.
When adding a locomotive to a consist just make sure that the
LH200 direction set is set appropriately. If the locomotive is oriented
so its front is the same as the consist, set the direction forward. If
the locomotive is oriented so its rear is in the same direction as the
consist, set the direction reverse.
11.4 Displaying the locomotive address within an MU
Scroll through the stack until the MU is displayed or enter the
address in the stack.
+
A
Whenever you see the address of the MU on the display,
you can scroll through the locomotives in the MU using this
key sequence.
After the last locomotive address in the MU has been displayed, the
multi unit address will again be displayed when you press the same
key sequence again.