Lenz DIGITAL PLUS SET-02, Руководство пользователя

Страница: 38 / 62

38 Information SET-02
A
When the desired value is set, begin the
programming with key "A " key.
IMPORTANT NOTE
If the decoder is properly installed, the locomotive will have a slight jerk
indicating successful programming, if instead you hear a audible buzz for
the locomotive, there is a short in the locomotive and this should be
corrected before you subject the decoder to full DCC track power.
A
Press key "A " key once more and you
will see "Ad" again.
Programming a DCC locomotive's address with SET-02 is different
than from other DCC command stations. With SET-02 you simply
set the desired new locomotive address. The SET-02 automatically
decides which CVs to program on your behalf. To accomplish this
SET-02 uses a feature called "Direct CV Mode" if you wish to
program an address greater than 99 using this easy method you
need to ensure that your decoder supports "Direct CV Mode" and
also supports 4 digit or extended addressing. All
Digital plus by Lenz ® XF and XS series decoders and decoders
with version 4.1 or 5.1 support these features. If you are using a
different manufacturer's decoder, check with its operating manual to
see if you can use this shortcut mode. If not you will have to
manually program the decoder's CVs using register mode described
on page 55.
If you want to program a different feature of the locomotive decoder
other than the address, press key "Shift" when "Ad" is shown on the
display and choose a different feature (a different CV). The rest of
the procedure is identical with the procedure of PoM.
If your decoders do not support the programming mode "CV", you
can program these decoders using a technique called "register
mode". You will find Information on this in the section "Programming
using Register Mode" which starts on page 55.