Operating Instructions
1.
Connect to a power source. The multi-cooker will give one short buzz and the LED will read ”00:00”
which is stand-by mode. You can choose different functions for cooking.
2. ANY FUNCTION BUTTON
-- When in stand-by mode, you can choose any of the function buttons
and the LED will show the pressure time.
•
When you choose any function, you can tap ”+””-” to adjust the time, then wait 5 seconds for
the multi-cooker to start.
•
Example- “RICE” shows P12 and it will start within 5 seconds; you can make adjustments
within this time.
•
At this time the indicator light is ON and the first two numbers shown on the LED begin the
timer countdown. The other two numbers shown on the LED indicate the PRESSURE TIME,
such as 10, and the light on the “RICE” button is also on.
Function Instruction
(
mins
)
Soup CHICKEN
BEEF
Fish
Rice
SLOW
COOK
Steam Cake
Default Pressure
-Light (P)
20
10
15
6
8
60
8
18
Default Pressure
-Normal (P)
25
15
20
8
12
120
10
Default Pressure
-Stronger (P)
30
18
25
12
15
180
15
“+””-” Pressure
(P)
10~5
0
5~30
1~30
8~15
5~20
60~180
1~30
/
3. Baked
: Bake function has 6 Pressure options to select from, including P10/ P 15/ P 20/ P 25/ P
30/ P 35. Press the baked key to select different Pressure Time options, after selecting desired
pressure time, you can press “+””-” to increase & decrease pressure time. All options can adjust from
P3~P40.
4. Pressure:
When the multi-cooker is in pending status, you can select the Pressure button to
select your favorite pressure range. This function supports Pressure range from P1~P60.
5. WARM
-- If you press any function button when the function finishes, you will hear three long
buzzes, and automatically enter Keep Warm mode. The LED shows ”bb” and the indicator light will
continuously flash. The temperature will remain at 60-80 degrees Celsius.
6.Timer
-- When the multi-cooker is in stand-by mode, you can press the Preset Time button, and
adjust up to 24 hours countdown. Once the timer reaches 00:00, it will begin cooking. The digital
display will “+””-” in 30 minute increments. You can first choose any cooking function then set the
Preset Time when the LED is flashing to automatically start the countdown timer. After a 5 second
pause, the countdown will begin and then proceed to cook as you programmed once the timer
reaches 00:00.
7. OFF
-- When the multi-cooker is OFF, the indicator light is off. No matter what function you
choose once you press the OFF button, the multi-cooker will remain in stand-by mode.
8. “+””-”
-- It can adjust the Pressure Time and Timing. Pressure Time will adjust by 1 minute and
Timing will adjust by 30 minutes.
9.
BEEP SOUND: occurs when A) you connect to an electric power source; gives one short beep.
B) you press any function button; gives one short beep.
C) any function finishes then enters Keep Warm mode; gives three long beeps.
D) an error occurs; gives five long beeps.