Lenovo ThinsStation P320 Скачать руководство пользователя страница 45

Страница: 45 / 202

• To view detailed information about the devices (such as the optical drive and network adapters) on your

computer, do the following:

1. Depending on your Windows version, do one of the following:

– For Windows 7: Click the Start button to open the Start menu. Right-click

Computer

, and then

click

Properties

– For Windows 10: Right-click the Start button to open the Start context menu.

2. Locate and double-click your device in

Device Manager

to view device properties. Type the

administrator password or provide confirmation if prompted.

Memory

Your computer supports up to four double data rate 4 (DDR4) error correction code (ECC) unbuffered dual
inline memory modules (UDIMMs) and non-ECC (UDIMMs).

For more information, see “Memory module” on page 101.

Storage drives

Your computer supports the following storage drives:

• Card reader (9-in-1 card reader, available on some models)

• Optical drive (available on some models)

• Serial Advanced Technology Attachment (SATA) hard disk drive

• SATA hybrid drive (available on some models)

• SATA solid-state drive (available on some models)

• PCIe solid-state drive (M.2 solid-state drive) (available on some models)

To view the amount of storage drive space, do the following:

1. Depending on your Windows version, do one of the following:

• For Windows 7: Click the Start button to open the Start menu. Right-click

Computer

, and then click

Manage

• For Windows 10: Right-click the Start button to open the Start context menu.

2. Click

Disk Management

and follow the instructions on the screen.

Video features

• Integrated graphics supports the following connectors on your computer:

– DisplayPort connector

– Video Graphics Array (VGA) connector

• Discrete graphics card installed in one of the PCIe x16 graphics card slots (available on some models)

(the connectors vary by graphics card)

Audio features

Integrated audio controller supports the following connectors and devices on your computer:

• Audio line-in connector

• Audio line-out connector

• Headset connector

• Internal speaker

• Microphone connectors

Chapter 2

Product overview

Содержание ThinsStation P320











































































































































































































Результаты поиска

Содержание ThinsStation P320

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinsStation P320, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinsStation P320

Отзывы:

Бренды по названию

Популярные бренды