Lenovo ThinsStation P320 Скачать руководство пользователя страница 129

Страница: 129 / 202

Figure 63. Installing the hard disk drive into the bracket

6. Slide the bracket with the new hard disk drive into the front-access storage enclosure until it snaps into

position. Press the notch to secure the enclosure cover and lock the enclosure cover with the key.

Figure 64. Installing the hard-disk-drive bracket

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 166.

Device in the Multi-drive Conversion Kit

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1.

The Multi-drive Conversion Kit (hereafter referred to as kit) might be equipped with either one or both
of the following components:

• Slim optical drive

• Internal storage drive (such as hard disk drive, solid-state drive, or hybrid drive)

Slim optical drive

To install or replace a slim optical drive in the kit, do the following:

Chapter 9

Hardware installation and replacement

121

Содержание ThinsStation P320











































































































































































































Результаты поиска

Содержание ThinsStation P320

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinsStation P320, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinsStation P320

Отзывы:

Бренды по названию

Популярные бренды