Lenovo ThinkSystem SR950 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 390

Lenovo ThinkSystem SR950 Скачать руководство пользователя страница 2

Note

Before using this information and the product it supports, be sure to read and understand the safety

information and the safety instructions, which are available at:

http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.html

This equipment is not suitable for use in locations where children are likely to be present.

In addition, be sure that you are familiar with the terms and conditions of the Lenovo warranty for your server,
which can be found at:

http://datacentersupport.lenovo.com/warrantylookup

Twentieth Edition (December 2021)

© Copyright Lenovo 2017, 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-
05925.

«
1
2
3
4
...
»

Содержание ThinkSystem SR950







































































































































































































































































































































































































Отзывы:

Нет отзывов