Lenovo ThinkServer TD350, Руководство по установке

Страница: 41 / 122

5. In the Registration window, configure the information as prompted and click Next . The following steps
are based on the scenario that Skip Registration is selected in this step. If the “Really skip the
registration now?” window is displayed, select Yes .
Note: If the Warning window is displayed, click OK .
6. In the Add On Product window, select add-ons to be installed and click Next . The following steps are
based on the scenario that default options are selected in this step.
7. In the System Role window, select Default System and then click Next .
8. In the Suggested Partitioning window, use the suggested partitioning method and click Next . If you want
to create a drive partition, do one of the following:
• Manually create a root partition (/)
a. In the Suggested Partitioning window, click Create Partition Setup and select Custom
Partitioning (for experts) . Click Next .
b. In the Expert Partitioner window, select Hard Disks from System view . Then select the disk (for
example, sda ) for installing the operating system and click Add .
c. In the New Partitions Size window, select Custom Size .
d. Type the amount of space (for example, 80 GB) in the Custom Size field and then click Next .
e. Select Operating System from Role .
f. In the Formatting Options area, select BtrFS from the File system drop-down list box.
g. In the Mount partition area, select the forward slash (/) from the Mount Point drop-down list box.
h. Click Finish .
• Manually create a boot partition (/boot)
a. In the Expert Partitioner window, select Hard Disks from System view . Then select the disk (for
example, sda ) for installing the operating system and click Add .
b. In the New Partitions Size window, select Custom Size .
c. Type the amount of space (for example, 2 GB) in the Custom Size field and then click Next .
d. Select Operating System from Role .
e. In the Formatting Options area, select Ext4 from the File System drop-down list box.
f. In the Mounting partition area, select /boot from the Mount Point drop-down list box.
g. Click Finish .
• Manually create a swap partition
a. In the Expert Partitioner window, select Hard Disks from System view . Then select the disk (for
example, sda ) for installing the operating system and click Add .
b. In the New Partitions Size window, select Custom Size .
c. Type the amount of space (for example, 2 GB) in the Custom Size field and click Next .
d. Select Swap from Role and click Next .
e. In the Format partition area, select Swap from the File system drop-down list box.
f. In the Mount partition area, select Swap from the Mount Point drop-down list box.
g. Click Finish .
Go to the Expert Partitioner window. The created swap partition and root partition are displayed in the
window. Ensure that the created partitions are correct and click
Accept .
Note: If the “Really use this setup?” window is displayed, click Yes .
9. In the Clock and Time Zone window, set the time zone and time and click Next .
Chapter 2
.
Installing an operating system in legacy mode
35