Lenovo ThinkServer TD350, Руководство по установке

Страница: 32 / 122

g. Go back to the Expert Partitioner window. Select Hard Disks ➙ sda in the System view area, and
then click Add .
h. In the New Partition Type window, select Primary Partition and click Next .
i. In the New Partition Size window, select Custom Size and type 1GB in the Size area, and then
click Next .
j. In the Format partition area, select Ext3 from the File System drop-down list box.
k. In the Mounting partition area, select the forward slash (/) from the Mount Point drop-down list
box. Then, click Finish . The boot partition is created.
l. Go back to the Expert Partitioner window. Select Hard Disks ➙ sda in the System view area, and
then click Add .
m. In the New Partition Type window, select Primary Partition and click Next .
n. In the New Partition Size window, select Custom Size and type 1GB in the Size area, and then
click Next .
• In the Format partition area, select Swap from the File System drop-down list box. In the Mounting
partition area, the item becomes to Swap automatically in the Mount Point drop-down list box.
Then, click Finish . The swap partition is created.
10. Go back to the Expert Partitioner window. Ensure that the drive partition is correct and click Accept .
11. In the Installation Settings window, click Software to select your desired software programs, and then
click OK . If the YaST window is displayed, click Accept .
12. Click Install to install the software programs that you have selected.
Note: If the warning window is displayed, configure the settings as you need, and then click OK and
TryAgain . If the YaST window is displayed, click Accept . Then go back to the Installation Settings
window and click Install . If the YaST2 window is displayed, click Install .
13. The setup process continues after the server restarts. Set your root user password and click Next . If the
YaST2 window is displayed, click Yes .
Note: The password must contain at least six characters and consist of upper case letters, lower case
letters, and numbers.
14. Set your host name and domain name. Then, click Next .
15. Configure your network in the Network Configuration window. Then, click Next .
16. In the Test Internet Connection window, configure the settings as you need. Then, click Next . The
following steps are based on the scenario that No. Skip This Test is selected in this step.
17. In the Network Services Configuration window, click Next .
18. In the User Authentication Method window, configure the settings as you need. Then, click Next . The
following steps are based on the scenario that Local (/etc/passwd) is selected in this step.
19. In the New LDAP User window, configure the settings as you need. Then, click Next .
20. In the Release Notes window, click Next .
21. In the Hardware Configuration window, click Next .
22. In the Installation Completed window, click Finish .
Note: If the YaST window is displayed, click Continue .
23. Follow the instructions on the screen to log in to the operating system.
26
ThinkServer TD350 Operating System Installation Guide