Lenovo ThinkServer RD550, Руководство по установке операционной системы

Страница: 48 / 52

4. Restart your server.
5. Click System . Then, select Network Connections in the Preferences area. The Ethernet card list is
displayed.
6. Select the Ethernet card that you want to configure. Then, click Edit .
7. Click Ipv4 Settings , and then select Manual from the Method drop-down list box.
8. Click Add to configure the IP in the Address area. Then, click Apply . Your server restarts.
9. Repeat the previous steps to configure other Ethernet cards.
Installing the driver for the LPe16002B HBA card or a CNA card
This topic provides instructions on installing drivers for the following cards:
• LPe16002B HBA card
• 2x FC 16G ports MEZZ
• 4x FC 8G ports MEZZ
• Dual port 10G SFP+ Ports MeZZ
• 4x10GbE DP/QP SFP+ Ports MeZZ
• OCe14102 and Oce14401 CNA cards for FCoE, iSCSI, and NIC protocols
To install the driver for the card, do the following:
1. Download the driver for the card from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. Then, copy the folder to your USB storage device and connect the USB storage device to
your server.
2. Log in to the operating system and copy the folder from your USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /elx-lpfc-dd-sles11sp-10.2.185.0
./elx_lpfc_install.sh
Note: In the command lines,
elx-lpfc-dd-sles11sp-10.2.185.0
represents the name of the folder that
the drive is stored.
elx_lpfc_install.sh
represents the driver name. Use the corresponding file name
on your server.
4. Restart your server.
Installing the driver for a RAID card
This topic provides instructions on how to install the driver for both add-on and onboard RAID cards, such
as the LSI 9286CV-8e RAID 510i adapter, the RAID 720i exp, and the RAID 110i adapter.
To install the driver for a RAID card, do the following:
1. Download the corresponding driver for the RAID card from the Lenovo Web site. If the driver is a
compressed file, unzip it to a folder. Then, copy the folder to your USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd rpms-2
rpm-ivh *.rpm
44
ThinkServer RD550 and RD650 Operating System Installation Guide