Lenovo ThinkServer RD550, Руководство по установке операционной системы

Страница: 33 / 52

a. Click Partitioning and select Custom Partition (for experts) . Click Next .
b. In the Expert Partitioner window, select Hard Disks ➙ sda , and then click Add .
c. In the New Partitions Size window, select Custom Size .
d. Type the amount of space (in MB) in the Custom Size field and then click Next .
e. In the Formatting Options area, select Ext3 from the File system drop-down list box.
f. In the Mounting partition area, select the forward slash (/) from the Mount Point drop-down
list box.
g. Click Finish .
• Manually create a boot partition (/boot)
To create a boot partition, do the following:
a. In the Expert Partitioner window, select Hard Disks ➙ sda , and then click Add .
b. In the New Partitions Size window, select Custom Size .
c. Type the amount of space (in MB) in the Custom Size field and then click Next .
d. In the Formatting Options area, select FAT from the File System drop-down list box.
e. In the Mounting partition area, select /boot/efi from the Mount Point drop-down list box.
f. Click Finish .
• Manually create a swap partition
To create a swap partition, do the following:
a. In the Expert Partitioner window, select Hard Disks ➙ sda , and then click Add .
b. In the New Partitions Size window, select Custom Size .
c. Type the amount of space (in MB) in the Custom Size field.
d. In the Format area, select Swap from the File system drop-down list box.
e. In the Formatting Options area, select Swap from the Mount Point drop-down list box.
f. Click Finish .
Go to the Expert Partitioner window, the created root partition, boot partition, and swap partition are
displayed. Click
Accept . The drive partition is finished.
9. In the Installation Settings window, click Software to select your desired software programs, and then
click OK . If the YaST window is displayed, click Accept .
10. Click Install to install the software programs that you have selected.
Notes:
• If a Warning window is displayed, select the option as you desired. the following steps are based on
the scenario that Ignore this conflict of ... is selected. Do the following:
a. Click OK-TryAgain .
b. In the YaST window, click Accept .
c. In the Installation Settings window, click Install to begin the installation.
• If the YaST2 window is displayed, click Install to begin the installation.
11. When the Confirm Installation window is displayed, click Install . When the installation process is
completed, the server restarts automatically.
12. The setup process continues after the server restarts. Set your root user password. Then, select Next
and press Enter. When the YaST2 window is displayed, click Yes .
Note: The password must contain at least six characters and consist of upper case letters, lower
case letters, and numbers.
Chapter 3
.
Installing an operating system in legacy mode
29