Lenovo ThinkServer RD550, Руководство по установке операционной системы

Страница: 26 / 52

Note: The password must be a combination of upper case letters, lower case letters, and numbers.
Installing the Hyper-V Server 2012 operating system
This topic provides instructions on how to install the Hyper-V Server 2012 operating system.
To install the Hyper-V Server 2012 operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. When the message
Press any key to boot from cd or dvd...
is displayed, press any key. If the message
Windows Setup [EMS Enabled]
is displayed, press Enter. Wait several minutes for the system to load
the files.
3. When the “Microsoft Hyper-V Server 2012” window is displayed, configure the language and other
options as you need and then click Next .
4. Click Install now .
5. Read the license terms and select I accept the license terms . Then, click Next .
6. Select the type of installation as you need. The following steps are based on the scenario that Custom:
Install the newer version of Hyper-V Server only (advanced) is selected in this step.
7. In the “Where do you want to install Windows?” window, depending on the SATA configuration on
your server, do one of the following:
• If your SATA configuration is set as RAID (both onboard SATA software RAID and RAID card ):
do the following:
a. Connect the USB storage device that contains the driver to your server and click Load Driver .
b. Click Browse to locate the required driver and then click OK .
c. In the “Select the driver to be installed” window, select Hide drivers that are not compatible
with hardware on this computer , select the driver that you want to install, and then click Next
to install the driver.
• If your SATA configuration is set as IDE : go to step 8.
• If your SATA configuration is set as AHCI : go to step 8. Be sure to install the AHCI driver after the
operating system installation is completed, see “Installing the driver for the SATA AHCI” on page 35.
8. In the “Where do you want to install Windows?” window, click Drive options (advanced) .
9. Select the hard disk drive on which you want to install the operating system, and then click New .
10. Type the amount of space (in MB), and then click Apply .
11. In the Install Windows window, click OK .
12. Ensure that the drive partition is correct, and then click Next . The installation begins.
Note: Your server restarts several times during the installation.
13. When prompted, press Ctrl+Alt+Delete.
14. Click Administrator . Follow the instructions on the screen to change the password and then log
in to the operating system.
Installing the Hyper-V Server 2012 R2 operating system
This topic provides instructions on how to install the Hyper-V Server 2012 R2 operating system.
To install the Hyper-V Server 2012 R2 operating system, do the following:
22
ThinkServer RD550 and RD650 Operating System Installation Guide