![background image](http://html.mh-extra.com/html/lenovo/thinkserver-rd550/thinkserver-rd550_operating-system-installation-manual_202918018.webp)
• If your SATA configuration is set as
RAID
(both
onboard SATA software RAID
and
RAID card
):
do the following:
a. Connect the USB storage device that contains the driver to your server and click
Load Driver
.
b. Click
Browse
to locate the required driver and then click
OK
.
c. In the “Select the driver to be installed” window, select
Hide drivers that are not compatible
with hardware on this computer
, select the driver that you want to install, and then click
Next
to install the driver.
• If your SATA configuration is set as
IDE
: go to step 9.
• If your SATA configuration is set as
AHCI
: go to step 9. Be sure to install the AHCI driver after the
operating system installation is completed, see “Installing the driver for the SATA AHCI” on page 35.
9. In the “Where do you want to install Windows?” window, click
Drive options (advanced)
.
10. Select the hard disk drive on which you want to install the operating system, and then click
New
.
11. Type the amount of space (in MB), and then click
Apply
.
12. In the Windows Setup window, click
OK
.
13. Ensure that the drive partition is correct, and then click
Next
. The installation begins.
Note:
The server restarts several times during the installation.
14. When the Settings window is displayed, set an administrator password and click
Finish
. When
prompted, follow the instructions on the screen to log in to the operating system.
Installing the Microsoft Windows Storage Server 2012 R2 Standard
operating system
To install the Microsoft Windows Storage Server 2012 R2 Standard operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. When the message
Press any key to boot from CD or DVD
is displayed, press any key. If the message
Windows Setup [EMS Enabled]
is displayed, press Enter. Wait several minutes for the system to load
the files.
3. When the Windows Server 2012 R2 window is displayed, configure the language and other options as
you need, and then click
Next
.
4. Click
Install now
.
Note:
Type your product key if prompted and then click
Next
. The product key information is available
on the Microsoft Certificate of Authenticity label or product packaging.
5. Read the license terms and select
I accept the license terms
. Click
Next
.
6. In the “Which type of installation do you want?” window, select the type of installation as you need.
Then, click
Next
. The following steps are based on the scenario that
Custom: Install the newer
version of Storage server only (advanced)
is selected in this step.
7. In the “Where do you want to install Windows?” window, depending on the SATA configuration on
your server, do one of the following:
• If your SATA configuration is set as
RAID
(both
onboard SATA software RAID
and
RAID card
):
do the following:
a. Connect the USB storage device that contains the driver to your server and click
Load Driver
.
b. Click
Browse
to locate the required driver and then click
OK
.
14
ThinkServer RD550 and RD650 Operating System Installation Guide
Содержание ThinkServer RD550
