Lenovo ThinkServer RD550, Руководство по установке операционной системы

Страница: 43 / 52

Installing drivers for the Intel Management Engine Interface
To install the driver for the Intel Management Engine Interface, do the following:
1. Download the driver from the Lenovo Web site. The most up-to-date device drivers for various server
models are always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers. Copy the driver to a USB storage device and then connect the USB
storage device to your server.
2. Use the
Pnputil-i-a <driverinf>
command to install the driver, for example:
e:
cd Management
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and Management
represents the subdirectory where your driver is located.
3. Restart your server after the installation is completed.
Installing drivers for the SUSE Linux Enterprise Server 11 operating
system with Service Pack 3
To install drivers for the SUSE Linux Enterprise Server 11 operating system with Service Pack 3, refer to
the related topics.
• “Installing the driver for the chipset” on page 39
• “Installing the driver for an onboard graphics card” on page 39
• “Installing the driver for an Ethernet card or a CNA card” on page 40
• “Installing the driver for an HBA card or a CNA card” on page 41
• “Installing the driver for the LSI 9286CV-8e HBA card” on page 41
• “Installing the driver for a RAID card” on page 42
Note: Your server comes with a chipset driver pre-installed. You do not need to install the chipset driver
manually.
Installing the driver for the chipset
For the SUSE Linux Enterprise Server 11 operating system with Service Pack 3, the driver for chipset comes
with the operating system installation.
Installing the driver for an onboard graphics card
To install the driver for an onboard graphics card, do the following:
1. Download the driver for the onboard graphics card from the Lenovo Web site. If the driver is a
compressed file, unzip it to a folder. Then, copy the folder to your USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
• For the file with the .sh extension:
cd /tmp
cd lxdrv-1-
./update.sh
Chapter 4
.
Installing drivers
39