manualshive.com logo in svg

Lenovo ThinkServer 6531, Руководство по техническому обслуживанию аппаратной части

Lenovo ThinkServer 6531 - надежный сервер для предприятий. Познакомьтесь с техническими аспектами и руководством по обслуживанию оборудования в Hardware Maintenance Manual. Загрузите его бесплатно с manualshive.com и получите подробную информацию о конфигурации и настройке сервера для оптимальной производительности.

Поделиться
Скачать
background image

Note:

The following language keyboards are supported: English, Dutch, French, German, Italian,

Japanese, Spanish, and Turkish.

You will then see one or more reminders about configuring storage devices, and then you will be
presented with the Lenovo License Agreement. Read the license agreement carefully. You must agree with
terms in order to continue.

After agreeing to the license agreement, you will be given the following choices:

v

Continue to the main program interface

v

Use a shortcut to install an operating system based on a response file that you previously created using
the EasyStartup program

v

Use a short cut to configure RAID controllers based on a RAID response file that you previously
created using the EasyStartup program

If you continue to the main program interface, you will have the following selectable options:

v

Compatibility notes:

This selection provides information about the RAID controllers, operating

systems, and server configurations supported by that version of the EasyStartup program.

v

User Guide:

This selection provides information about the features provided by that version of the

EasyStartup program.

v

Hardware list:

This selection displays a list of hardware devices detected by the EasyStartup program.

v

Configure RAID:

This selection enables you to view the current RAID configuration for each installed

RAID controller and make changes if needed.

v

Install operating system:

This selection displays a series of choices and prompts to collect information

required for installation, prepares the hard disk for installation, and then initiates the installation
process using the user-provided operating-system installation CD or DVD.

v

About:

This selection displays version information and legal notices.

Configuring RAID

The RAID configuration feature that is part of the EasyStartup program enables you to view and change
RAID settings for supported RAID controllers. Through this feature, you have the ability to configure
each installed controller. The program automatically detects the number of discs currently attached to the
controller, determines the possible RAID configurations that can be configured, and prompts you through
the steps to configure one or more disc arrays with or without hot-spare drives. As you configure each
controller you will be given the option to save the RAID configuration settings to a RAID response file,
which you can use on other similarly configured Lenovo servers. This method satisfies most users’ needs.

Note:

The EasyStartup program provides limited support for the IBM ServeRAID-BR10il SAS/SATA

Controller. You must use the LSI Configuration Utility to configure the disc array for this controller.
However, after the disc arrays are configured, you can use the EasyStartup program to install the
operating system and associated device driver. See “Using LSI Configuration Utility program” on page
206 for details.

Typical operating system installation

When you select

Install operating system

, you will be prompted for information required for the

installation. The prompts vary depending on the operating system selected. This section describes the
tasks associated with a typical Windows operating system installation. Each task must be completed in
order before moving to the next task.

Note:

Ensure that your RAID controller is correctly configured before you select an operating system to

install.

v

Select operating system:

This task enables you to select the operating system that you will be

installing.

v

Select disk:

This task enables you to select the disk where you want to install the operating system.

Chapter 8. Configuring the server

211

Содержание ThinkServer 6531





















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer 6531

IBM BladeCenter HS23 User Manual preview
BladeCenter HS23
Бренд: IBM Страницы: 30
IBM System x3950 X6 Product Manual preview
System x3950 X6
Бренд: IBM Страницы: 53
Sun Microsystems Netra t 1120 Service Manual preview
Netra t 1120
Бренд: Sun Microsystems Страницы: 148
Omneon MediaGrid ContentServer 3000 Quick Reference Manual preview
MediaGrid ContentServer 3000
Бренд: Omneon Страницы: 2
Supermicro SuperServer 6019P-WT User Manual preview
SuperServer 6019P-WT
Бренд: Supermicro Страницы: 133
Intel SRPM8 Quick Start Manual preview
SRPM8
Бренд: Intel Страницы: 32
D-Link DPR-2000 Quick Installation Manual preview
DPR-2000
Бренд: D-Link Страницы: 40
BITMAIN AntMiner S9 Repair Manual preview
AntMiner S9
Бренд: BITMAIN Страницы: 20
Leightronix UltraNEXUS User Manual preview
UltraNEXUS
Бренд: Leightronix Страницы: 22
Lexmark MarkNet Quick Reference preview
MarkNet
Бренд: Lexmark Страницы: 76
Lexmark N7000E Setup Manual preview
N7000E
Бренд: Lexmark Страницы: 134
IBM System x3300 M4 Product Manual preview
System x3300 M4
Бренд: IBM Страницы: 52
Imagine NX1012DS Installation And Quick Start preview
NX1012DS
Бренд: Imagine Страницы: 2
ImageQuest W150 User Manual preview
W150
Бренд: ImageQuest Страницы: 31
SAFARI Montage T-440i Installation Manual preview
T-440i
Бренд: SAFARI Montage Страницы: 8
SAFARI Montage WAN–1212 Installation Manual preview
WAN–1212
Бренд: SAFARI Montage Страницы: 8
ORing Industrial Networking Corp. IDS-181A Quick Installation Manual preview
IDS-181A
Бренд: ORing Industrial Networking Corp. Страницы: 2
Planet FPS-3300 User Manual preview
FPS-3300
Бренд: Planet Страницы: 71

Бренды по названию

Популярные бренды

Загрузить еще бренды