Lenovo ThinkPad 600 Скачать руководство пользователя страница 57

Страница: 57 / 221

Using a PC Card in Windows NT (with CardWizard)

You can make your PC Card easy to use with the PC Card support
software called CardWizard.

CardWizard minimizes user intervention in configuring many PC
Cards. CardWizard provides the following:

Capability to check

Self-Check

If you have a problem, refer to this section.

PC Card information

PC Card Information

CardWorks provides various information about your PC Card.

Capability to stop

Stopping the PC Card

If you remove the PC Card from your computer, sometimes you
need to stop the PC Card.

Help

Help

You can get help for most of the windows.

Note

Multifunction PC Cards are not supported in CardWizard for
Windows NT.

To start the CardWizard for Windows NT, do as follows:

Start Windows NT 4.0.

Click on Start.

Select Programs.

Click on CardWizard for Windows NT.

The menu bar for the CardWizard window includes File, View,
Actions, Options, and Help options. Each option provides
CardWizard functions to perform actions with cards, modify
user-selected options, and obtain help.

Chapter 5. Using Your Computer with a PC Card

Содержание ThinkPad 600






























































































































































































































Результаты поиска

Содержание ThinkPad 600

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkPad 600, Руководство пользователя

Результаты поиска

Содержание ThinkPad 600

Отзывы:

Бренды по названию

Популярные бренды