Lenovo RackSwitch G8272, Руководство по установке

Страница: 71 / 118

© Copyright Lenovo 2019 Chapter 4: Removing and Replacing Components
71
3. Set the new switch to use the Machine Type-Model (MTM) number of the old unit:
 Lenovo Enterprise Network Operating System (ENOS):
 Lenovo Cloud Network Operating System (CNOS):
where
1234-56X
is the MTM from your old unit.
Note: The MTM (
1234-56X
) shown here is merely an example. Use the actual
MTM recorded from your old G8272 unit.
4. Set the new switch to use the serial number of the old unit:
 Lenovo Enterprise Network Operating System (ENOS):
 Lenovo Cloud Network Operating System (CNOS):
where
XX01234
is the serial number of your old unit.
Note: The serial number (
XX01234
) shown here is merely an example. Use the
actual serial number recorded from your old G8272 unit.
5. Reset the switch using the following command:
When prompted for confirmation, enter y . The switch then restarts.
6. After the switch reboots, return to the command prompt and verify that the VPD
information is correct using the following command:
G8272(config)# boot mtm 1234-56X
New MTM value: 1234-56X
Please reset the system for the new changes to take effect
G8272(config)# hardware mtm 1234-56X
New MTM value: 1234-56X
Please reset the system for the new changes to take effect
G8272(config)# boot esn XX01234
G8272(config)# hardware esn XX01234
G8272# reload