Lenovo 7Y45, Руководство по установке

Страница: 63 / 116

Install the 3.5-inch/2.5-inch drive cage
Use this information to install the 3.5-inc /2.5-inch drive cage.
“
Read
the
installation
Guidelines” on
page 54
“
Power off
the server for
this task” on
page 86
“
ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 55
Before installing the drive cage:
1.
Watch the procedure
. A video of this procedure is available from the following links:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Dy5N2dPXFx5Pht-FljAi6S
• Youku:
https://list.youku.com/albumlist/show/id_51977169
To install the drive cage, complete the following steps:
Step 1. Install the backplane or backplate (see “Install the 3.5-inch/2.5-inch hot-swap backplane” on page
59 or “Install the 3.5-inch simple-swap drive backplate” on page 60).
Step 2. Press the drive cage in until the release latch clicks into place.
Figure 38. Drive cage installation
Install the 3.5-inch/2.5-inch hot-swap backplane
Use this information to install the 3.5-inch/2.5-inch hot-swap backplane.
“
Read
the
installation
Guidelines” on
page 54
“
Power off
the server for
this task” on
page 86
“
ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 55
Before installing a hot-swap drive backplane:
Chapter 3
.
Server hardware setup
59