Lenovo 7D8T Скачать руководство пользователя страница 96 | Manualshive

Страница: 96 / 218

Lenovo 7D8T Скачать руководство пользователя страница 96

• Never touch the gold memory module connector contacts or allow these contacts to touch the outside of

the memory-module connector housing.

• Handle memory modules with care: never bend, twist, or drop a memory module.
• Do not use any metal tools (such as jigs or clamps) to handle the memory modules, because the rigid

metals may damage the modules.

• Do not insert memory modules while holding packages or passive components, which can cause package

cracks or detachment of passive components by the high insertion force.

• Go over

“Installation Guidelines” on page 41

to ensure that you work with safety.

• Turn off the server and peripheral devices and disconnect the power cords and all external cables (see

“Power off the server” on page 13

).

• If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover,

or remove the server from the rack.

Watch the procedure.

A video of this procedure is available from the following link:

•

https://www.youtube.com/playlist?list=PLYV5R7hVcs-DV_Ja2E7l6T-lwN_IrnJRk

Procedure

Step 1. If any of the modules to be installed is PMEM, make sure to complete the following procedure

before physically installing the module:

1. Back up stored data in PMEM namespaces.
2. Disable PMEM security with one of the following options:

•

LXPM

Go to

UEFI Setup

➙

System Settings

➙

Intel Optane PMEMs

➙

Security

➙

Press to

Disable Security

, and input passphrase to disable security.

•

Setup Utility

Go to

System Configuration and Boot Management

➙

System Settings

➙

Intel Optane

PMEMs

➙

Security

➙

Press to Disable Security

, and input passphrase to disable

security.

3. Delete namespaces with command corresponding to the operating system that is installed:

•

Linux

command:

ndctl destroy-namespace all -f

•

Windows

Powershell command

Get-PmemDisk | Remove-PmemDisk

4. Clear Platform Configuration Data (PCD) and Namespace Label Storage Area (LSA) with the

following ipmctl command (for both Linux and Windows).

ipmctl delete -pcd

Notes:

See the following links to learn how to download and use impctl in different operating

systems:

https://datacentersupport.lenovo.com/us/en/videos/YTV101407

• Linux:

https://datacentersupport.lenovo.com/us/en/solutions/HT508642

5. Reboot the system.

Step 2. Locate the slot to install the memory module in on the system board.

88

ThinkEdge SE450 Maintenance Manual

«
...
94
95
96
97
98
...
»

Содержание 7D8T



























































































































































































































Отзывы:

Нет отзывов