manualshive.com logo in svg

Lenovo 7D8T, Руководство по обслуживанию

"Lenovo 7D8T - это мощное устройство, которое требует регулярного обслуживания. Скачайте бесплатное Руководство по техническому обслуживанию с нашего сайта, чтобы узнать, как правильно ухаживать за вашим устройством. manualshive.com - лучшее место для скачивания руководств." (Note: manualshive.com should be replaced with the actual website URL)

Поделиться
Скачать
background image

If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific 
server.  

Notes: 

–  To perform an in-band update through Windows or Linux, the operating system driver must be installed 

and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.

Additional information about configuring Ethernet over USB, see:

“Configuring Ethernet over USB” section in the XCC documentation version compatible with your 
server at 

https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html

–  If you update firmware through the Lenovo XClarity Controller, make sure that you have downloaded 

and installed the latest device drivers for the operating system that is running on the server.

For additional information about using Lenovo XClarity Controller to update firmware, see:

“Updating Server Firmware” section in the XCC documentation compatible with your server at 

https:// 

sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html

Important:

Lenovo XClarity Controller (XCC) supported version varies by product. All versions of Lenovo 

XClarity Controller are referred to as Lenovo XClarity Controller and XCC in this document, unless 
specified otherwise. To see the XCC version supported by your server, go to 

https:// 

sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html

.

• 

Lenovo XClarity Essentials OneCLI

Lenovo XClarity Essentials OneCLI is a collection of command line applications that can be used to 
manage Lenovo servers.Its update application can be used to update firmware and device drivers for your 
servers. The update can be performed within the host operating system of the server (in-band) or remotely 
through the BMC of the server (out-of-band). 

For additional information about using Lenovo XClarity Essentials OneCLI to update firmware, see:

http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_update.html

• 

Lenovo XClarity Essentials UpdateXpress

Lenovo XClarity Essentials UpdateXpress provides most of OneCLI update functions through a graphical 
user interface (GUI). It can be used to acquire and deploy UpdateXpress System Pack (UXSP) update 
packages and individual updates. UpdateXpress System Packs contain firmware and device driver 
updates for Microsoft Windows and for Linux.

You can obtain Lenovo XClarity Essentials UpdateXpress from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-xpress

• 

Lenovo XClarity Essentials Bootable Media Creator

You can use Lenovo XClarity Essentials Bootable Media Creator to create bootable media that is suitable 
for firmware updates, VPD updates, inventory and FFDC collection, advanced system configuration, FoD 
Keys management, secure erase, RAID configuration, and diagnostics on supported servers.

You can obtain Lenovo XClarity Essentials BoMC from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-bomc

• 

Lenovo XClarity Administrator

If you are managing multiple servers using the Lenovo XClarity Administrator, you can update firmware for 
all managed servers through that interface. Firmware management is simplified by assigning firmware- 
compliance policies to managed endpoints. When you create and assign a compliance policy to managed 
endpoints, Lenovo XClarity Administrator monitors changes to the inventory for those endpoints and flags 
any endpoints that are out of compliance.

Chapter 1

.

Introduction

11

Содержание 7D8T



























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 7D8T

NEC Express 5800 Series User Manual preview
Express 5800 Series
Бренд: NEC Страницы: 90
ICP DAS USA PDS-220F Series User Manual preview
PDS-220F Series
Бренд: ICP DAS USA Страницы: 94
QNAP TS-130-US User Manual preview
TS-130-US
Бренд: QNAP Страницы: 39
sysmik ICS-709 Installation Notes For Electrical Personnel preview
ICS-709
Бренд: sysmik Страницы: 2
Avaya INTUITY AUDIX LX Getting Started Manual preview
INTUITY AUDIX LX
Бренд: Avaya Страницы: 68
Supermicro 7044H-82 User Manual preview
7044H-82
Бренд: Supermicro Страницы: 124
MISUMI IP-004S User Manual & Installation Manual preview
IP-004S
Бренд: MISUMI Страницы: 18
IOGear GPSU21 Installation Manual preview
GPSU21
Бренд: IOGear Страницы: 48
LaCie 301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard... User Manual preview
301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard...
Бренд: LaCie Страницы: 74
Fujitsu PRIMERGY Econel 230R S1 Service Supplement Manual preview
PRIMERGY Econel 230R S1
Бренд: Fujitsu Страницы: 53
Fujitsu Primergy ECONEL 100 S2 Start Manual preview
Primergy ECONEL 100 S2
Бренд: Fujitsu Страницы: 8
Fujitsu PRIMERGY Econel 200 S2 Options Manual preview
PRIMERGY Econel 200 S2
Бренд: Fujitsu Страницы: 65
Fujitsu PRIMERGY MX130 S1 Operating Manual preview
PRIMERGY MX130 S1
Бренд: Fujitsu Страницы: 85
Fujitsu PRIMERGY Econel 100 Operating Manual preview
PRIMERGY Econel 100
Бренд: Fujitsu Страницы: 64
Fujitsu primergy h250 Manual preview
primergy h250
Бренд: Fujitsu Страницы: 105
Fujitsu Primergy N800 Manual preview
Primergy N800
Бренд: Fujitsu Страницы: 142
Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual preview
PRIMERGY GX2460 M1
Бренд: Fujitsu Страницы: 251
Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual preview
PRIMERGY MX130 S2 Upgrade and maintenance manua
Бренд: Fujitsu Страницы: 256

Бренды по названию

Популярные бренды

Загрузить еще бренды