Lenovo 70B4 Скачать руководство пользователя страница 180

Страница: 180 / 246

6. Touch only the edges of the microprocessor and carefully lift it straight up and out of the microprocessor

socket. Place the old microprocessor on a static-protective surface.

Notes:

• Do not touch the gold contacts on the bottom of the microprocessor.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 111. Removing the microprocessor

7. Touch the static-protective package that contains the new microprocessor to any unpainted surface on

the outside of the server. Then, remove the new microprocessor from the package.

8. Remove the protective cover that protects the gold contacts on the bottom of the new microprocessor.

Do not touch the pins on the microprocessor socket and the gold contacts on the bottom of the new
microprocessor.

Figure 112. Do not touch the pins

168

ThinkServer TD340 User Guide and Hardware Maintenance Manual

Содержание 70B4























































































































































































































































Результаты поиска

Содержание 70B4

Отзывы:

Lenovo 70B4, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения, Страница: 180 / 246

Результаты поиска

Содержание 70B4

Отзывы: