Lenovo 70B4 Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 246

Lenovo 70B4 Скачать руководство пользователя страница 124

To install the CacheCade key, locate the CacheCade key connector on the ThinkServer RAID 710 Adapter
and then insert the CacheCade key into the CacheCade key connector.

Figure 58. Inserting the CacheCade key into the CacheCade key connector

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installment, go to “Completing the parts replacement” on page 205.

Installing or removing the ThinkServer RAID 500 Upgrade Key for
Advanced RAID

This topic provides instructions on how to install or remove the ThinkServer RAID 500 Upgrade Key for
Advanced RAID (hereinafter referred to as the TR 500 Key).

The TR 500 Key expands the capability of the installed ThinkServer RAID 500 Adapter by activating RAID 5
and RAID 50 levels for advanced SATA/SAS hardware RAID. You can purchase a TR 500 Key from Lenovo.

Installing the TR 500 Key

Attention:

Do not open your server or attempt any repair before reading and understanding “Safety information”

on page iii and “Guidelines” on page 83.

This topic provides instructions on how to install the TR 500 Key on a ThinkServer RAID 500 Adapter if
your server has one installed.

Attention:

Back up your data before you begin if you want to reconfigure RAID and reinstall the operating

system after installing the TR 500 Key.

112

ThinkServer TD340 User Guide and Hardware Maintenance Manual

«
...
122
123
124
125
126
...
»

Содержание 70B4























































































































































































































































Отзывы:

Нет отзывов