Configuring the Marvell BIOS Setup to enable SATA or SAS RAID 0, 1,
5, or 10 functionality
To enable SATA/SAS RAID functionality, use the Marvell BIOS Setup configuration utility as the SATA/SAS
configuration utility. This utility assumes that the system has the required number of hard disk drives.
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
2. On the Marvell BIOS Setup screen, use the arrow keys to select
RAID Config
and press Enter. The
RAID Config
menu opens.
3. From the
RAID Config
menu, select
Create array
.
4. Use the arrow keys and the Enter key to select each free hard disk drive that you want to include in the
array.
5. Select
Next
and press Enter.
6. From the
Create array
menu, select
RAID level
and press Enter.
Note:
Only the valid RAID levels will be active.
7. Select your desired RAID level (
RAID 0
,
RAID 1
,
RAID 5
, or
RAID 10
) and press Enter.
8. From the
Stripe size
menu, you can change the stripe size or keep it as default.
9. Type a proper array name in the
Array name
field.
10. Select
Next
and press Enter.
11. When prompted, press Y to complete the array creation and RAID configuration.
Configuring the Marvell BIOS Setup to set an optional hot spare hard
disk drive
To configure the Marvell BIOS Setup to set an optional hot spare hard disk drive:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
2. On the Marvell BIOS Setup screen, use the arrow keys to select
RAID Config
and press Enter. The
RAID Config
menu opens.
3. From the
RAID Config
menu, select
Spare Management
.
4. Use the arrow keys to select the hard disk drive you want to set as an optional hot spare hard disk drive.
5. Use the arrow keys to select
Next
and press Enter.
6. Press Y when prompted to set the optional hot spare hard disk drive.
Configuring the Marvell BIOS Setup to delete an optional hot spare
hard disk drive
To configure the Marvell BIOS Setup to delete an optional hot spare hard disk drive:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
2. On the Marvell BIOS Setup screen, use the arrow keys to select
RAID Config
and press Enter. The
RAID Config
menu opens.
3. From the
RAID Config
menu, select
Spare Management
.
4. Use the arrow keys to select the optional hot spare hard disk drive you want to delete.
5. Use the arrow keys to select
Next
and press Enter.
6. Press Y when prompted to delete the optional hot spare hard disk drive.
Configuring the Marvell BIOS Setup to delete an array
To configure the Marvell BIOS Setup to delete an array:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
48
ThinkStation Hardware Maintenance Manual
Содержание 4157 - ThinkStation S20 - 2 GB RAM
