background image

42" Indoor / Outdoor Wood Burning Fireplaces
P/N  850,031M  REV. B  04/2006 

MP-42OD

MODEL

MERIT

® 

PLUS SERIES

This installation manual will enable you to obtain a safe, effi cient and de-
pendable installation of your fi replace system. Please read and understand 
these instructions before beginning your installation.

Do not alter or modify the fi replace or its components under any circum-
stances.  Any modifi cation or alteration of the fi replace system, including 
but not limited to the fi replace, chimney components and accessories, 
may void the warranty, listings and approvals of this system and could 
result in an unsafe and potentially dangerous installation.

IMPORTANT! TO ASSURE PROPER ALIGNMENT OF GLASS 
DOORS: INSTALL THIS FIREPLACE IN A SQUARE AND PLUMB 
CONDITION, USING SHIMS AS NECESSARY AT SIDES AND/OR 
BOTTOM.

NOTE:

 

This fi replace has been listed and approved for use outdoors or 

indoors.

CAUTION! THIS FIREPLACE IS EQUIPPED TO BE READILY IN-
STALLED OUTDOORS.  IF INSTALLED INDOORS, YOU MUST 
INSTALL THE COMBUSTION AIR COVER PROVIDED WITH THE 
INSTALLATION KIT OR PURCHASE THE OPTIONAL OUTSIDE AIR 
KIT GATE OAKG-OD.  SEE INSTRUCTIONS INSIDE THIS MANUAL 
FOR FURTHER DETAILS.

IMPORTANT! POUR ASSURER L’ALIGNEMENT APPROPRIÉ DES 
PORTES DE VERRE : INSTALLEZ CE FOYER SUR UNE SURFACE 
PLANE ET METTRE À NIVEAU EN UTILISANT DES CALES AU 
BESOIN SUR LES CÔTÉS OU EN DESSOUS.

ATTENTION! CETTE CHEMINÉE A ÉTÉ ÉNUMÉRÉE ET APPROU-
VÉE POUR ÊTRE AISÉMENT INSTALLÉE À L’INTÉRIEUR OU 
DEHORS. S’INSTALLÉ À L’INTÉRIEUR, VOUS DEVEZ INSTALLER 
LA COUVERTURE D’AIR DE COMBUSTION ÉQUIPÉE DE KIT 
D’INSTALLATION OU ACHETER LA PORTE EXTÉRIEURE FAC-
ULTATIVE OAKG-OD DE KIT D’AIR. VOIR LES INSTRUCTIONS À 
L’INTÉRIEUR DE CE MANUEL POUR D’AUTRES DÉTAILS.

INSTALLATION
INSTRUCTIONS

OTL Report No.

116-F-37-2

RETAIN THESE INSTRUCTIONS

FOR FUTURE REFERENCE 

VEUILLEZ GARDER CE MANUEL

POUR RÉFÉRENCE FUTURE.

A French manual is available upon request. Order P/N 850,031CF

Ce manuel d’installation est disponible en francais, simplement en 
faire la demande. Numéro de la pièce 850,031CF.

Содержание Merit Plus MP-420D

























Отзывы: