Lennox CLIMATIC 60, Руководство пользователя

Страница: 4 / 106

CLIMATIC™ 60 – AIRCOOLED CHILLERS
Page 2 MUL 41E -0610/ 06-2011
1 - INTRODUCTION
1.1 - CONTROLLER CLIMATIC™60
The new generation of microprocessor based control, CLIMATIC™ 60 may be fitted to the Lennox Chiller or Heat
pump range. It inherits 20 years of technology and field operating experience from its predecessors the
CLIMATICTM1 and CLIMATICTM2 and CLIMATICTM50.
LENNOX has found the latest hardware technology available on the market place and developed software
specifically designed for Chiller and Heat pump applications, maximising the LENNOX unit’s efficiency and
performance.
1.2 - COMPATIBILITY
This documentation is compatible with the programs Chiller and Heat pump:
• ECOLEAN range from software version CH060 STD - Vers. 01.0 - Rev 00.0,
• NEOSYS standards range (STD) from software version CH060 STD - Vers. 01.0 - Rev 00.0.
1.3 - WARNING
Any parameter modification should be carried out by trained and licensed competent technician. Before start-up or
restart of a unit controlled by the CLIMATIC™ 60, it is mandatory to check adequacy between CLIMATIC™ 60 and
the unit with its options. In case of wrong parameters, the inputs / outputs connections could be incorrect and may
create some operation problems for the units and ultimately breakdowns. Lennox cannot be held responsible for
any claims on the units due to a wrong parameters sequence or a parameters modification carried out by non
competent technicians. In this case, the warranty will be legally null and void.
2 - OVERVIEW