23
Table 12. Display Window - Codes and Indicators
88
or
88
.8
Display temperature (Celsius or Fahrenheit).
ON
On icon is for three seconds when:
•
TIMER ON is set (if the unit is off. ON remains on when TIMER ON is set.
•
FRESH, SWING, TURBO, ECO, BREEZE AWAY, ECO INTELLIGENT EYE or SILENCE feature is turned on.
OF
OF icon is for three seconds when:
•
TIMER OFF is set
•
FRESH, SWING, TURBO, ECO, BREEZE AWAY, ECO INTELLIGENT EYE or SILENCE feature is turned off.
dF
The unit is in defrost mode.
CL
This will display when the unit is in active clean mode.
FP
This will display when the unit is in 46°F (8°C) heating mode is running.
This will display when the ECO feature has been activated.
Unit Features
Table 13. Unit Features
Feature Name
Description
Auto-Restart
If the unit loses power, it will automatically restart with the prior settings once power has been restored.
Anti-mildew
When turning off the unit from COOL, AUTO (COOL), or DRY modes, the air conditioner will continue operate
at very low power to dry up condensed water and prevent mildew growth.
Louver Angle Memory
When turning on your unit, the louver will automatically resume its former angle.
Self Clean
The Self Clean Technology washes away dust, mold, and grease that may cause odors when it adheres to the
heat exchanger by automatically freezing and then rapidly thawing the frost. The self clean operation is used
to produce more condensed water to improve the cleaning effect, and the cold air will blow out. After cleaning,
the internal blower then keeps operating with hot air to blow-dry the evaporator, thus preventing the growth of
mold and keeping the inside clean.
When this function is turned on, the indoor unit display window appears CL, after 20 to 45 minutes, the unit will
turn off automatically and cancel Self Clean function.
Breeze Away
This feature avoids direct air flow blowing on the body.
Refrigerant Leakage Detection
The indoor unit will automatically display
EL0C
when it detects refrigerant leakage.
ECO Intelligent Eye
The system is controlled intelligently under Intelligent eye mode. It can detect the people’s activities in the
room. In cooling mode, when you are away for 30 minutes, the unit will automatically lower the frequency to
save energy. And the unit will automatically start and resume operation if sensing human activity again.
Sleep Operation
The SLEEP function is used to decrease energy use while you sleep (and don’t need the same temperature
settings to stay comfortable). This function can only be activated via remote control. And the Sleep function is
not available in FAN or DRY mode.
When in COOL mode, the unit will increase the temperature by 1°C (2°F) after 1 hour, and will increase an
additional 1°C (2°F) after another hour.
When in HEAT mode, the unit will decrease the temperature by 1°C (2°F) after 1 hour, and will decrease an
additional 1°C (2°F) after another hour.
The sleep feature will stop after 8 hours and the system will resume normal operation.
NOTE:
During sleep mode, the following functions are not available, active clean, silence feature, breeze away,
refrigerant leakage detection and ECO feature.