21
Manual Control Button
Manual control
button
Figure 29. Manual Control Button
Dry Mode Operation (Dehumidification)
Procedure
1.
Using the provided wireless remote control, press the
MODE
button and select
DRY
mode.
2. Press the
UP/ DOWN
button to select the desired
temperature. The temperature setting range is from
62°F (17°C) to 86°F (30°C) in one degree increments.
NOTE:
The blower is preset at a low speed and cannot be
changed therefore it will get cold and most likely
will surpass the temperature setting by 6-10
°
F (3-
5
°
C) depending on the room size or other various
factors. Also the
Follow Me
mode does not
operate in this mode.
NOTE:
In addition, the indoor units do not have a humidistat
installed therefore they are unable to determine
humidity levels. This product is not recommend as
a main source for dehumidification.
Sequence of Operation
When in dry mode operation the unit is actually in cooling
mode with a low speed blower operation. Set remote temp
to a lower room temp to begin the dry mode operation.
The compressor will stop when the room temperature is
4°F (2°C) lower than the temperature setting.
However there is a temperature compensation for cooling
mode that is two degrees Celsius. So the unit will stop
when the temperature is 8°F (4°C) lower than the room
temperature settings.