Lennox EMEA Euromon 100 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 28

11
2.7. PROTECTIVE DEVICES AND SAFETY MEASURES
The manufacturer has provided the following safety protections:
1. The metal casing is bolted to the structure.
2. The fans are bolted to the metal structure.
3. The fan access is covered by a grille bolted in place.
4. The motor compressors have thermal protection.
5. The units have a high pressure switch with manual reset for protection against high pressures.
2.8. DISPOSING OF PACKAGING
Wooden, cardboard, plastic and polystyrene packaging must be disposed of in accordance with the laws
applicable in the country in which the unit is used.
2.9. CONTROLS, ADJUSTMENTS AND CHECKS TO BE MADE
Before starting up the unit, check that:
-
the fixing bolts are properly tightened,
-
the electrical connections have been properly made.
-
the electrical connections are properly tightened
In case of opening the unit, check that:
-
no tools have been left inside the unit
-
the assembly has been made correctly,
-
there are no gas leaks,
-
the front cover has been correctly fitted.
3. OPERATING INSTRUCTIONS
3.1. CONNECTING THE UNIT TO EXTERNAL POWER SOURCES
3.2. ELECTRICAL POWER CONNECTION
You must perform a preliminary inspection of the components of the electrical panel, and then proceed to the
electrical connection.
CAUTION
Before making the electrical connection, check that the mains voltage and frequency are as
indicated on the unit label and that the current remains at a tolerance of +/- 10% with respect to
the nominal value. IF THE CURRENT DOES NOT REMAIN WITHIN THIS TOLERANCE, THE USER
MUST PROVIDE VOLTAGE STABILISERS.
IMPORTANT
The protective devices have been fitted by the manufacturer for user safety during work.