Lenel OnGuard 2013, Руководство по установке

Страница: 35 / 51

NGP Keypad Installation Guide
revision 1.007 —
35
7 Manually Calling the Access Control PC From the LCD
Keypad
This operation is for systems that can communicate with the access control software.
If the system configurations have been changed, for example, by the customer to add a new user, it will be
necessary to update the access control software configurations for the system.
Note: This feature is not supported with an external modem.
1. The system Unique ID and 3rd Party Password have to be programmed in the system, if they were
not previously.
See the
Advanced Programming Guide to program them in Advanced configurations using the
keypad.
To enable this feature,
Config Dial Out
is set to
1
in Advanced program section S005:10.
2. Log on to the keypad as a system or service user.
3. Push the right arrow key for Menus.
4. Use the left and right arrow keys to browse the menu until Director
displays. Press Ok .
Menu Options

Director


Ok
5. Director Options , Update Config will display. Press Ok .
Menu Options

Update Cfg

Ok
6. Updating Config, Please Wait will appear and then change to
Connecting .
Updating Config
Please wait......
Download Config
Connecting......
7. When the system is communicating with the access control software,
"In Progress" will appear with a rotating bar next to it.
Download Config
In Progress.... -
8. An asterisk:

will appear between the hour and the minute display on the time and date main
screen until the communication is complete.