Lenel m3000, Руководство по установке, Страница: 10 / 118

Introduction
10
M3000 Installation Guide
•
Digital Output (DO) board: 16DO or 16DOR
For a complete list of option board combinations, refer to Appendix A: Configuration of Option
Boards on page 107 .
The items received in your shipment depend on the items ordered. Inspect the package and contents
for visible damage. If any components are damaged or missing, do not use the unit; contact the
supplier immediately. If you need to return the unit, you must ship it in the original box.
Specifications
For UL-compliant installations, refer to UL Compliance on page 96 .
Enclosure Specifications
Enclosure Specifications
Physical
dimensions 17 inches high x 15.6 inches wide x 6.2 inches deep
(431 mm high x 396 mm wide x 158 mm deep)
Operating
environment
+35
°
F to +122
°
F (+2
°
C to +50
°
C)
Humidity
range 5% to 95% non-condensing
Thermal air
cooling At least 6 inches (15.2 cm) of clearance is required on all four sides of the
controller.
Power (Door strikes powered separately)
Controller
powered by 110/230 VAC to 12 VDC 6 Amp power supply is included.
12 AH gel-cell battery for battery backup is included.
Controller
power
requirements Provided power supply meets all power requirements for this device.
Cabling
Host to
controller Network: Category (Cat) 5 cable
Controller to
readers Refer to specific reader manual for more details.
5 V Maximum cable distance 300 feet (91.44 m) with pull-up resistors
12 V Cable distance
•
Greater than 500 feet (152.4 m) and/or current per reader greater
than 150 mA: use Belden 8725 (or equivalent) 20-AWG, 4-pair
twisted shielded wire
•
Less than 500 feet (152.4 m): use wire within 18- to 22-AWG range
Controller to
DIs or DOs Use any cable with the desired number of individually shielded pairs.