Preparing the implement
37
7
PREPARING THE IMPLEMENT
7.1 General
Before using the implement for the first time, we recommend that you set it up as
described below while you are still in the yard and familiarise yourself with the im-
plement and its functions. The settings are adjusted with the implement mounted
on the tractor.
7.2
Upper control link length
Lower the plough.
Turn the upper control link until the plough standing on even ground is 1 to 3 cm
higher at the front than at the rear.
If the upper control link is in the slot, it must be turned until the top link pin is at the
front of the slot when the plough is lowered and the plough is also 1 to 3 cm high-
er at the front than at the rear.
7.3 Depth
wheel
Set the depth wheel according to the intended working depth.
Swivel the depth wheel as far as the stop.
Measure the vertical distance between the lower edge of the wheel and the
share plane.
If necessary, check the vertical distance between the lower edge of the wheel
and the share plane.
7.4 Skimmer
See «Skimmers, page 52».
