Operation
48
11.5.2 Inclination setting (double-acting)
Raise the plough by 5 – 10 cm.
Briefly apply pressure to the hydraulic
hose which runs to hose connection P
on the turnover ram (1).
The stop arm (2) rotates a few centime-
tres away from the stop.
Turn the adjusting nut (3) to set the incli-
nation required.
Move the lever on the tractor spool valve
to the opposite pressure setting.
The stop arm (2) rotates a few centime-
tres towards the stop.
Lower the plough.
Check whether the setting is correct.
If not, repeat the adjustment process de-
scribed above.
11.5.3 Inclination setting (single-acting)
For a turnover ram (1) with return line to
the tractor oil tank which is connected to a
single-acting spool valve, set the inclina-
tion as follows:
Raise the plough by 5 – 10 cm.
Briefly apply pressure to the hydraulic
hose which runs to hose connection P
on the turnover ram (1).
The stop arm (2) rotates a few centime-
tres away from the stop.
Turn the adjusting nut (3) to set the incli-
1
1
3
2
1
