14
WARNING!
• Be careful not to spray liquids on the electrical equipments, pedal/push-button strip
and on the protections of the chair.
• You must follow the handling directions given in the safety data sheets of the
detergents used.
• While during the cleaning operation of the chair, inhaling powders are produced,
use a proper protective device and air adequately the room.
• Use proper individual protection devices
9.3. Authorized Personnel
Repairs and maintenance of the chair can be carried out exclusively by competent personnel, that is of Bru
-
saferri & C. or authorized by it. Information on the staff to contact for possible interventions can be obtained
directly from Brusaferri & C.
9.4. Cleaning
Each time you make a treatment, always cover the mattress with towels or disposable towels before the pa
-
tient sit on the chair (See §7.2. Use of the mattress).
The broken chair, if under warranty, must be sent to the Service Centre together with the certificate of gua
-
rantee, transport charges must be paid by the purchaser.
Pay particular attention to the jeans that can stain the covering without any possibility of being
removed.
Clean the chair before each use, paying particular attention to remove all traces of physiological
fluids of the previous patient. To clean the chair use a cloth and lukewarm water (if necessary
diluted neutral detergent). If necessary, use a non-aggressive disinfectant, then wipe off with a
clean dry cloth.
Do not use products such as alcohol, acetone, bleach, paint thinner, gasoline.
WARNING! Any form of warranty expires if interventions are carried out on the chair
by someone not authorized by Brusaferri & C.
9.2. Extraordinary Maintenance
Any extraordinary maintenance must be performed by qualified personnel of the technical service Brusaferri
& C. or Service Centre authorized by the manufacturer.
Information about the Authorized Service Centre to which you can turn, can be obtained directly from the
manufacturer Brusaferri & C srl – phone 0374/363068-69 – mail: [email protected]
For a correct and quickly resolution of the problem, it is necessary to communicate the model and the serial
number of the chair and the description of the defect, or what are the visible problems, and under what
condition it occurs.
