10
6.9. Heating
The heating system of the mattress can be regulated by the HEAT button panel, which is on the backrest.
Button 1
: regulation of the lowest temperature (40° C).
Button 1+2:
regulation of the highest temperature (42° C)
Lightened Red Led:
Heating is ON
6.10. Wheels
You can install the braked wheels on the chair by unscrewing the 4 fixed feet.
6.11. Chair Rotation
The upper part of the chair can rotate to 180° (90° left + 90° right). To rotate the
chair, turn the handle situated under the basement, fix the chair into the required
position and block the rotation by tightening the handle clockwise.
6.8. Medical accessories
Accessory
Thight Support
Heel Support
Feet Support
Medical Armrests
Blood taking armrests
Curtain holder
I.V. Rod
Inox Metal Tray
Position of the guides
On the seat
On the seat
On the seat
On the back
On the seat
On the back
On the back
On the seat
Clamps to use to fix the accessory
Fixed
Fixed
Fixed
Rotatable
Fixed
Rotatable
Rotatable
Fixed
You must insert the accessories in the slots of the clamps and fix to the guides by screwing and unscrewing
the handle. As for the blood-sample taking armrests, the thigh supports and the metal tray, once they are
properly installed it is possible to turn the handles without loosening the clamps; simply pull the handles and
place them so that they do not bother while using the chair.
6.5. Zak and Bi-Zak version
The Zak Version is fitted with an adjustable and removable headrest. Push or pull the headrest to regulate its
inclination; release the knob located in the rear part of the back to expand or remove the headrest. Besides
the headrest, the Bi-Zak version is fitted also with an adjustable and removable leg rest; release the screw
situated under the legrest to adjust its position.
6.6. LEMI MED and HEMO 4 version
LEMI MED is equipped with ZAK headrest, two seat guides and two back guides to fix medical accessories.
HEMO 4 is equipped with ZAK headrest and leaning feet support, two guides on the seat, two armrests for
blood donation, two fixed clamps and a roll holder.
6.7. Rollholder
The chair can be equipped with a roll holder, which is installed by using specific strings fixed to two screws
on the backrest.
Always turn off the heating when you do not use the chair!
Always block the brake of each wheel before the client sit on the chair.
