LELY 5.4301.0000.1, Инструкция по установке и эксплуатации

Страница: 18 / 126

2-2 Safety
D-I012.1109EN
innovators in agriculture
2.3 Safety Instructions
YOU are responsible for the SAFE operation and maintenance of your
JUNO 150 Feed Pusher. YOU must make sure that you and anyone else
who is going to operate, maintain or work in the vicinity of the JUNO
150 knows all the related SAFETY information in this manual.
YOU are the key to safety. Good safety practices protect you and the
people around you. Make these practices a working part of your safety
program. Make sure EVERYONE who operates, maintains or works near
the feed pusher obeys the safety precautions. Do not risk injury or death
by ignoring good safety practices.
•
JUNO 150 owners must train operators before they operate the JUNO
150. This training must be repeated at least annually
•
The operator must read, understand and obey all safety and
operating instructions in the manual
•
A person who has not read and understood all safety and operating
instructions is not permitted to operate the JUNO 150
•
Do not modify the equipment in any way. Unauthorized modification
may impair the function and/or safety and could affect the life of the
equipment, and persons
•
Only use approved spare parts, and make sure they are only installed
by authorized technicians.
2.3.1 Electrical Safety
•
Only an authorized electrician must install the electrical power supply
for the charging station of the JUNO 150.
•
Make sure the electrical grounding of the electrical system and all
parts of the charging station of the JUNO 150 meet the local rules
and regulations.
•
Replace any damaged electrical lines, conduits, switches and
components immediately .
•
Switch the power OFF with the OFF button on the multiboard PCB
before you start to work on the system.
•
Pull the plug from the socket before you start to work on the
charging station.
2.3.2 Installation Safety
•
Read and understand the instructions in this manual
•
The JUNO 150 weighs approximately 575 kg (1268 lb.). Always use the
correct hoisting equipment when you move the JUNO 150 Feed
Pusher
•
Hoist the JUNO 150 Feed Pusher with a rope attached to the hoisting
eye. (page 5-12)
•
The JUNO 150 is not stable until it is correctly installed. Make sure it is
correctly supported at all times during movement and installation
•
Make sure the JUNO 150 is correctly installed in the barn
•
Make sure the electrical power supply is correct before you connect it
to the charging station of the JUNO 150
•
Only an authorized electrician must install the electrical power supply
for the charging station of the JUNO 150.